Software use
Main function
The main interface of the software is as shown in the figure: It is divided into several functional areas such as [Settings], [Measurement], [Diagnosis], [Display], [Trigger] and [Quick Function]. You can click on the link to view the detailed description of the corresponding functional area:
- Settings : Used to set the working mode, trigger mode, exposure settings, data processing and other functions of the 3D camera.
- Measurement：The interface provides feature detection (such as points, lines, surfaces) and measurement operators (such as step difference, flatness), etc. By setting upper and lower limits, it is used to view measurement data and determine OK/NG, etc.
- Diagnosis：Used to display hardware status, setting parameters, and running logs.
- Display：Used to display shooting results, images can be displayed using different settings. It can also display the information of the current image data frame and the information of the pixels at the specified position in the image.
- StatusBar：Located in the lower left corner of the interface, it displays the product model, serial number, hardware version, connection method and current status of the device.
- Trigger：The control software triggers the camera or pauses the camera to capture.
- Tools/Quick Function：Located in the upper left corner of the interface, it contains some convenient tools/functions.
